Information Bergen Specifications Machined in California
Finished in Texas (CERAKOTE®)
Designed by Rhuk.Tech
WKL or WK top piece option
Gasket Top-Mount
296.20 mm x 114.70 mm x 18mm (front height)
6° typing angle Kit Includes Aluminum top & bottom pieces
Aluminum top mount plate
Wilba.Tech - WT60-G-GRAPHITE (solder) or WT60-H1-GRAPHITE (hotswap)
Mounting hardware
Gaskets
SKUF feet
Packaged in a hard-shell carrying case General Info / PCB Acceptable Quality StandardsPlease note: All delivered units will have no external machining flaws.There may be small blemishes in the coating that appear to be granular particles underneath the coating, there is no way to control this during the Cerakote process and this is still to be considered a-grade. Inner faces may appear and feel slightly more coarse than external faces. Plate may feature slight burrs (aluminum shavings still partially attached).
Disclaimers
Kindly note that only the kit images are of 3D renders and are for illustration purposes. Keycaps are shown for demonstrative purposes only and are not included with the purchase of these keyboards. Shipping & Returns RETURNS POLICY Last updated January 01, 2020 If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund. Please see below for more information on our return policy. RETURNS All returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item. All returned items must be in new and unused condition, with all original packaging and protective shipping material inside.
The customer will be responsible for returning the item back to us via a trackable postal carrier. RETURN PROCESS To return an item, please begin the process here to obtain a Return Merchandise Authorization (RMA) number. REFUNDS After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least three (3) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed.
Please note that we must pass along the 4% payment processing fee for any approved returns. EXCEPTIONS The following items cannot be returned: ● DIY cable kits ● Standalone cable parts ● PCB's that have been used For defective or damaged products, please contact us through the support page to arrange a refund or exchange. QUESTIONS If you have any questions concerning our return policy, please contact us here.



• Machined in California and finished in Texas (Cerakote®)
• Designed by Rhuk.Tech
• WKL or WK top piece option
• Gasket Top-Mount
• 296.20 mm x 114.70 mm x 18mm (front height)
• 6° typing angle
• Kit includes aluminum top & bottom pieces, aluminum top mount plate, Wilba.Tech - WT60-G-GRAPHITE (solder) or WT60-H1-GRAPHITE (hotswap), mounting hardware, gaskets, SKUF feet, and a hard-shell carrying case
• Acceptable Quality Standards
• All delivered units will have no external machining flaws, small blemishes in the coating, and plate may feature slight burrs (aluminum shavings still partially attached)
• Keycaps are not included

Bergen Accessories

Information Bergen is a simplistic 60% top-mount keyboard that was designed by Rhuk Tech for unique two-tone CERAKOTE® (and now some mono colorways), check out the designer's site for more information.This DIY kit brings vibrancy to your setup in a minimalist package. Window cutouts on all 4 sides of the keyboard allow users to experience our carefully selected complementary colors which were chosen to work well with a number of keycap sets. Our gasket-top mounting system brings back reliability and convenience to the assembly process, with the added touch of our vibration-damping gasket material. All finishing and QC is done in-house, ensuring that the end product exceeds your expectations, and will stand up to the test of time. The perfect mix of design, creativity, and functionality allows you to get the best experience out of a custom mechanical keyboard.
Purchase additional accessories
Specifications WKL or WK top piece option
Gasket Top-Mount
296.20 mm x 114.70 mm x 18mm (front height)
6° typing angle
Machined in San Diego, California
CERAKOTE® finishing by Space in Austin, TX
Designed by Rhuk.Tech in Houston, TX General Info / PCB WKL vs. WK
WKL = WINDOWS KEY-LESS, has blockers instead of Windows keys. WK = WINDOWS KEY, features the standard 60% layout with windows keys Included Aluminum assembly (top, bottom, plate)
WT60-G-GRAPHITE (solder) or WT60-H1-GRAPHITE (hotswap)
Hardware
Gaskets
SKUF feet
Packaged in a custom hard-shell carrying case CERAKOTE® Information
In-house finishing conducted by Space.New colors to be available for in-stock purchase: CARBIDE
GRAPE
CLASSIC
AURORA
STONE Previously offered colors during group buy: RETRO
REBEL
LIGHTNING Acceptable Quality Standards Please note: All delivered units will have no external machining flaws.There may be small blemishes in the coating that appear to be granular particles underneath the coating, there is no way to control this during the Cerakote process and this is still to be considered A-Grade. Inner faces may appear and feel slightly more coarse than external faces. Plates coated with Cerakote may exhibit hook marks that will not be visible when the case is assembled.
Disclaimers
Kindly note that only the kit images are of 3D renders and are for illustration purposes. Keycaps are shown for demonstrative purposes only and are not included with the purchase of these keyboards. Shipping & Returns RETURNS POLICY Last updated January 01, 2020 If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund. Please see below for more information on our return policy. RETURNS All returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item. All returned items must be in new and unused condition, with all original packaging and protective shipping material inside.
The customer will be responsible for returning the item back to us via a trackable postal carrier. RETURN PROCESS To return an item, please begin the process here to obtain a Return Merchandise Authorization (RMA) number. REFUNDS After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least three (3) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed.
Please note that we must pass along the 4% payment processing fee for any approved returns. EXCEPTIONS The following items cannot be returned: ● DIY cable kits ● Standalone cable parts ● PCB's that have been used For defective or damaged products, please contact us through the support page to arrange a refund or exchange. QUESTIONS If you have any questions concerning our return policy, please contact us here.

ting format.

Bergen 60% Top-Mount Keyboard:
- Designed for unique two-tone Cerakote® colorways
- Window cutouts on all 4 sides of the keyboard
- Gasket-top mounting system with vibration-damping gasket material
- Finishing and QC done in-house
- WKL or WK top piece option
- 296.20 mm x 114.70 mm x 18mm (front height)
- 6° typing angle
- Machined in San Diego, California
- Cerakote® finishing by Space in Austin, TX
- Designed by Rhuk.Tech in Houston, TX
- Includes PCB, aluminum assembly (top, bottom, plate), WT60-G-GRAPHITE (solder) or WT60-H1-GRAPHITE (hotswap) hardware, gaskets, SKUF feet, and custom hard-shell carrying case
- Available colors: Carbide Grape, Classic Aurora, Blizzard Stone, Retro Rebel, and Lightning

Bergen

IN-STOCK (EXTRAS)
If you are looking to purchase the Viendi 8L Kit, you can find it here.

These are the optional add-on parts for the Viendi 8L: Gold Brass Plate, Black Nickel Plated Brass Plate, Extra Soldered PCB, Tactile Encoder, Smooth Encoder, 4 types of Knobs (Gold, Chrome, Nickel, Black), 2 types of Emblems (Gold & Nickel), and 3 luxury cables (All Black, Black & Gold, White & Gold)!If you order the extra PCB, it includes a standard tactile encode EC11, un-soldered.If you order the All color knob combo, it includes all other 3 colors of knobs.

- Viendi 8L Kit is available for purchase
- Optional add-on parts available: Gold Brass Plate, Black Nickel Plated Brass Plate, Extra Soldered PCB, Tactile Encoder, Smooth Encoder, 4 types of Knobs (Gold, Chrome, Nickel, Black), 2 types of Emblems (Gold & Nickel), and 3 luxury cables (All Black, Black & Gold, White & Gold)
- Extra PCB includes standard tactile encoder EC11, un-soldered
- All color knob combo includes all other 3 colors of knobs

Viendi8L Accessories

0% 0% 0% 0% 0% 0% 0% 0%0% 0% 0% 0% Pluto accessories 🚀In Stock $49.00 🔴Just 47 remaining Accessories O-ring Gasket PVD Brass accent Strip PVD Brass accent Laser Strip PVD Brass Black accent Strip ANSI hot-swap PCB ISO hot-swap PCB [Pre-order] Solder PCB Foam kit PC plate Aluminum Plate FR4 plate O-ring GasketPVD Brass accent StripPVD Brass accent Laser StripPVD Brass Black accent StripANSI hot-swap PCBISO hot-swap PCB[Pre-order] Solder PCBFoam kitPC plateAluminum PlateFR4 plate O-ring Gasket PVD Brass accent Strip PVD Brass accent Laser Strip PVD Brass Black accent Strip ANSI hot-swap PCB ISO hot-swap PCB [Pre-order] Solder PCB Foam kit PC plate Aluminum Plate FR4 plate Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart EMAIL ME WHEN AVAILABLE Buy now with PayPalBuy with More payment options Pluto accessories - ANSI hot-swap PCB is backordered and will ship as soon as it is back in stock. SKU: DP5659 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it SPECSPCB: 1.2mm thickness Non-Flex cut hot-swap/1.6mm solder PCBFoam kit: Case Foam & PCB foam & Switch padPlate: Non-flex cut Black aluminum/Polycarbonate/FR4 

- Pluto accessories are currently in production and available for purchase
- The accessories include O-ring Gasket, PVD Brass accent Strip, PVD Brass accent Laser Strip, PVD Brass Black accent Strip, ANSI hot-swap PCB, ISO hot-swap PCB, Solder PCB, Foam kit, PC plate, Aluminum Plate, and FR4 plate
- The O-ring Gasket is currently backordered and will ship when it is back in stock
- The PCB is 1.2mm thick and available in both hot-swap and solder options
- The Foam kit includes Case Foam, PCB foam, and Switch pad
- The Plate options include Non-flex cut Black aluminum, Polycarbonate, and FR4 materials

Pluto accessories

0% 0% 0% 0% 0% 0% 0% 0% TACO Accessories 🚀In Stock $19.00 🔴Just 48 remaining Accessories Polycarbonate plate Aluminum black plate FR4 plate Carbon fiber plate 1.2 mm Hot-swap ANSI non-flex cut PCB 1.2 mm Hot-swap ISO non-flex cut PCB 1.6 mm Solder non-flex cut PCB Foam Kit Polycarbonate plateAluminum black plateFR4 plateCarbon fiber plate1.2 mm Hot-swap ANSI non-flex cut PCB1.2 mm Hot-swap ISO non-flex cut PCB1.6 mm Solder non-flex cut PCBFoam Kit Polycarbonate plate Aluminum black plate FR4 plate Carbon fiber plate 1.2 mm Hot-swap ANSI non-flex cut PCB 1.2 mm Hot-swap ISO non-flex cut PCB 1.6 mm Solder non-flex cut PCB Foam Kit Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Buy now with PayPalBuy with More payment options TACO Accessories - Polycarbonate plate is backordered and will ship as soon as it is back in stock. SKU: DP5739 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it SPECS PCB: 1.2 mm non-flex cut hot-swap PCB/1.6mm non-flex cut solder PCB (with daughterboard+JST cable) Foam kit: Case Foam + PCB foam + Switch pad Plate: Non-flex cut Polycarbonate, Flex cut FR4/Carbon fiber/Aluminum black, not support stepped caps 

- TACO Accessories are currently in production and priced at $19.00
- Available accessories include polycarbonate, aluminum black, FR4, and carbon fiber plates
- Hot-swap PCB options include ANSI and ISO layouts, with non-flex cut and solder options
- Foam kit includes case foam, PCB foam, and switch pad
- Quantity options range from 1 to 10+
- Polycarbonate plate is currently backordered
- PCB specs include 1.2mm non-flex cut hot-swap PCB and 1.6mm non-flex cut solder PCB with daughterboard and JST cable
- Plate options include non-flex cut polycarbonate, flex cut FR4, carbon fiber, and aluminum black